General Care and Use Instructions

Keep your FUTRA SE Pastel Series in excellent playing condition by following these care, handling, and safety guidelines.

General Care

• Keep the guitar clean, dry, and protected from dust and moisture.
• Wipe the body, neck, fingerboard, strings, and hardware with a clean, soft microfiber cloth after playing.
• Handle the guitar carefully and avoid drops, impacts, or excessive pressure on the body and neck.
• Do not lift or carry the guitar by its strings, tuning machines, controls, or connected cables.
• Use a properly fitted padded guitar bag or hard case when transporting the instrument.

Matte Finish Care

• Use only cleaning products specifically formulated for matte-finished musical instruments.
• Do not use alcohol, solvents, bleach, household cleaners, abrasive materials, wax, or polishing compounds.
• Never spray cleaning products directly onto the guitar.
• Do not rub or polish the matte surface aggressively, as this may create uneven glossy areas or damage the finish.

Temperature and Humidity

• Keep the guitar away from direct sunlight, excessive heat, high humidity, extreme dryness, and sudden temperature changes.
• Do not leave the instrument inside a parked vehicle or near heaters, air conditioners, open windows, or other heat sources.
• Store the guitar in a cool, dry, and well-ventilated location.
• Allow the guitar to gradually adjust to room temperature before opening its case after exposure to extreme heat or cold.
• Use a suitable guitar humidifier or dehumidifier when environmental conditions require it.

Strings and Fingerboard

• Wipe the strings after every playing session to remove sweat, oils, and dirt.
• Replace strings that are rusty, damaged, discolored, or unable to hold their tuning properly.
• Use an appropriate acoustic-guitar string type and gauge.
• Do not overtighten the strings, as excessive tension may damage the neck, bridge, tuners, or guitar top.
• Keep the Canadian maple fingerboard clean and avoid excessive application of oils or conditioners.
• Do not apply traditional dark-fretboard oils unless the product is confirmed safe for a maple fingerboard.

Tuning and Hardware

• Tune each string gradually to the correct pitch using the built-in tuner or another reliable tuning device.
• Do not force the tuning machines beyond normal string tension.
• Regularly inspect the tuning machines, bridge, nut, saddle, strap button, and other hardware for looseness or damage.
• Have neck adjustments, fretwork, bridge repairs, and other major maintenance performed by a qualified guitar technician.

Smart System and Electronics

• Keep the F-1 smart module, LED display, speaker, controls, pickup, microphone, and connection ports clean and dry.
• Operate all buttons and control knobs gently.
• Lower the master volume before connecting a microphone, external amplifier, or other audio equipment.
• Begin at a low volume and increase it gradually to protect your hearing, the built-in speaker, and connected equipment.
• Use only compatible cables and connectors of the correct size.
• Do not insert damaged, dirty, wet, or incompatible plugs into the connection ports.
• Disconnect cables by holding the plug rather than pulling the cable.
• Stop using the electronic system if you notice unusual heat, odor, noise, smoke, distortion, or physical damage.

Bluetooth Use

• Keep the guitar and connected device within a reasonable operating distance for a stable Bluetooth connection.
• Bluetooth performance may be affected by walls, electronic equipment, and crowded wireless environments.
• Set the connected device to a low volume before playing audio through the guitar’s built-in speaker.
• Disconnect Bluetooth when it is not needed to help conserve battery power.

Battery and Charging

• Charge the guitar using a compatible USB Type-C cable and a suitable regulated power source.
• Avoid using damaged charging cables, incompatible adapters, or unsupported fast chargers.
• Do not charge the guitar in direct sunlight, near heat sources, or in wet or humid environments.
• Place the guitar on a stable and well-ventilated surface while charging.
• Do not leave the guitar charging unattended for an unnecessarily long period.
• Disconnect the charging cable when charging is complete.
• Do not use the guitar if its battery appears swollen, damaged, leaking, or unusually hot.
• Recharge the battery periodically when the guitar will be stored for an extended period.
• Battery inspection and replacement should only be performed by qualified service personnel.

Storage and Transportation

• Switch off the smart system and disconnect all cables before storing or transporting the guitar.
• Store the instrument in a padded guitar bag or hard case whenever possible.
• Keep cables and accessories in separate compartments to prevent scratches and pressure damage.
• Do not place heavy objects on top of the guitar or its case.
• Secure the instrument during transportation to prevent sliding, falling, or strong impacts.

Service and Maintenance

• Regularly inspect the guitar for cracks, loose components, fret wear, unusual neck movement, electronic problems, or changes in playability.
• Have structural repairs, electrical work, fretwork, setup adjustments, and battery servicing performed by a qualified technician.
• Do not open, disassemble, drill, repaint, or modify the electronic system without authorization.
• Unauthorized repairs or modifications may damage the instrument and affect its warranty.